Testing Machines: Benchtop Material Testing Machine, Pendulum Impact Testers, Plastic Impact Testers and Impact Specimen Notcher
About Us
Tinius Olsen is the leading specialist manufacturer and supplier of static tension and/or compression materials testing machines. Our machines are designed for use in Research and Quality Control to measure material’s strength and performance. Using Tinius Olsen equipment it is possible to perform such tests on raw materials such as metals, polymers, textiles, rubbers, adhesives, food as well finished components. A whole series of tests are available including tension, shear, compression, flex/bend, puncture/burst, tear, peel, melt flow, Charpy and Izod impact, friction, stiffness, heat distortion temperature, Vicat penetration, and torsion. All such tests are designed and implemented by Tinius Olsen in accordance with key international testing standards including ISO, ASTM, EN and other industrial standards. For more information please select the material you wish to test from an Applications tab or select a Product tab to view our extensive equipment range. Please click here. Tinius Olsen History Tinius Olsen has been manufacturing, servicing and calibrating testing equipment of the highest quality since 1880. In fact, many of the Tinius Olsen machines that were built in the early part of this century are still in operation. To achieve this record of reliability, you need a quality-built product, proper preventive maintenance and a trained field support staff committed to maximizing your equipment's performance and longevity. Quality Quality is our business. We understand that the reliability of your product depends not only on the testing equipment that you purchase, but also on the quality and commitment of the support that stands behind that equipment. Tinius Olsen is proud to announce that we are A2LA accredited in the USA and UKAS accredited in the UK. We are able to verify not only our equipment, but also a variety of other manufacturers' tensile, compression, impact, and hardness equipment which translates into one source for all your certification needs. Tinius Olsen's level of customer support is unequaled in the industry; from pre-scheduled maintenance/calibration contracts to our telephone support and priority on-site service, we're there when you need us. Support Tinius Olsen's level of customer support is unequaled in the industry. From pre-scheduled maintenance/calibration contracts to our telephone support and priority on-site service ... we're there when you need us. Tinius Olsen combines the highest level of customer support with a complete range of field service and calibration options to help assure you years of successful testing equipment performance. At Tinius Olsen we are building on over 121 years of materials testing experience, one satisfied customer at a time. Tinius Olsen Service Options On-Site Service/Calibration Priority Service/Calibration Customized Service/Calibration Arrangements Pre-Scheduled Preventive Maintenance Contracts Significant Savings for Multiple Units Click here for to get a list of our representatives.
Tinius Olsen is the leading specialist manufacturer and supplier of static tension and/or compression materials testing machines. Our machines are designed for use in Research and Quality Control to measure material’s strength and performance. Using Tinius Olsen equipment it is possible to perform such tests on raw materials such as metals, polymers, textiles, rubbers, adhesives, food as well finished components. A whole series of tests are available including tension, shear, compression, flex/bend, puncture/burst, tear, peel, melt flow, Charpy and Izod impact, friction, stiffness, heat distortion temperature, Vicat penetration, and torsion.
All such tests are designed and implemented by Tinius Olsen in accordance with key international testing standards including ISO, ASTM, EN and other industrial standards. For more information please select the material you wish to test from an Applications tab or select a Product tab to view our extensive equipment range.
Please click here.
Tinius Olsen History
Tinius Olsen has been manufacturing, servicing and calibrating testing equipment of the highest quality since 1880. In fact, many of the Tinius Olsen machines that were built in the early part of this century are still in operation. To achieve this record of reliability, you need a quality-built product, proper preventive maintenance and a trained field support staff committed to maximizing your equipment's performance and longevity.
Quality
Quality is our business. We understand that the reliability of your product depends not only on the testing equipment that you purchase, but also on the quality and commitment of the support that stands behind that equipment. Tinius Olsen is proud to announce that we are A2LA accredited in the USA and UKAS accredited in the UK. We are able to verify not only our equipment, but also a variety of other manufacturers' tensile, compression, impact, and hardness equipment which translates into one source for all your certification needs. Tinius Olsen's level of customer support is unequaled in the industry; from pre-scheduled maintenance/calibration contracts to our telephone support and priority on-site service, we're there when you need us.
Support
Tinius Olsen's level of customer support is unequaled in the industry. From pre-scheduled maintenance/calibration contracts to our telephone support and priority on-site service ... we're there when you need us.
Tinius Olsen combines the highest level of customer support with a complete range of field service and calibration options to help assure you years of successful testing equipment performance.
At Tinius Olsen we are building on over 121 years of materials testing experience, one satisfied customer at a time.
Tinius Olsen Service Options
Click here for to get a list of our representatives.
Benchtop Materials Testing Machines 1kN – 10kN Capacity
Tinius Olsen's line of Benchtop Materials Testing Machines are designed to test a wide spectrum of materials including metals, plastics, rubber, textiles, paper, yarn, wire, adhesives, ceramics, timber, foils, composites and finished components in tension, compression, flexure or shear. Maximum frame capacities from 1kN (200lbf, 100kg). All testing hardware is fully complemented by Tinius Olsen developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application. Capacity ranges for Benchtop Materials Testing Machines are: 1kN Capacity 5kN Capacity 10kN Capacity 25kN Capacity 50kN Capacity 75kN Capacity Benchtop Materials Testing Machines-1kN Capacity (200lbf) Model H1K-S UTM Model H1K-T UTM Model H1K-S UTM The 1kN (200 lbf) H1kS incorporates the latest advanced technology and quality engineering to give you the ultimate in durability, convenience, accuracy and ease of use. Powerful as a stand alone unit, the H1kS has capabilities that are enhanced by direct connection to a printer to produce a high resolution graph and comprehensive test report. The H1kS has a robust control unit with a backlit LCD display that can be positioned for optimum visibility. Test parameters are set through this console and a real time graph is displayed on the screen during the test Model H1K-T UTM The 1kN (200 lbf) H1kT builds on the technology and quality engineering used in the S Series to give you the ultimate in durability, convenience, accuracy and ease of use. The H1kT has the same capabilities as the S Series, but at a reduced cost. We are able to reduce the cost of the machine by eliminating the display of the S Series and talking directly to a pc running out testing software. Benchtop Materials Testing Machines-5kN Capacity (1000lbf) Model H5K-S UTM Model H5K-T UTM Model H5K-S UTM The 5kN (1,000 lbf) single column H5kS incorporates the latest advanced technology and quality engineering to give you the ultimate in durability, convenience, accuracy and ease of use. Powerful as a stand alone unit, the H5kS has capabilities that are enhanced by direct connection to a printer to produce a high resolution graph and comprehensive test report. The H5kS has a robust control unit with a backlit LCD display that can be positioned for optimum visibility. Test parameters are set through this console and a real time graph is displayed on the screen during the test Model H5K-T UTM The 5kN (1,000 lbf) single column H5kT builds on the technology and quality engineering used in the S Series to give you the ultimate in durability, convenience, accuracy and ease of use. The H5kT has the same capabilities as the S Series, but at a reduced cost. We are able to reduce the cost of the machine by eliminating the display of the S Series and talking directly to a pc running out testing software. Benchtop Materials Testing Machines-10kN Capacity (2000lbf) Model H10K-S UTM Model H10K-T UTM Model H10K-S UTM The 10kN (2000 lbf) two column H1kS incorporates the latest advanced technology and quality engineering to give you the ultimate in durability, convenience, accuracy and ease of use. Powerful as a stand alone unit, the H10kS has capabilities that are enhanced by direct connection to a printer to produce a high resolution graph and comprehensive test report. The H10kS has a robust control unit with a backlit LCD display that can be positioned for optimum visibility. Test parameters are set through this console and a real time graph is displayed on the screen during the test. Model H10K-T UTM The 10kN (2,000 lbf) dual column H10kT builds on the technology and quality engineering used in the S Series to give you the ultimate in durability, convenience, accuracy and ease of use. The H10kT has the same capabilities as the S Series, but at a reduced cost. We are able to reduce the cost of the machine by eliminating the display of the S Series and talking directly to a pc running out testing software.
Tinius Olsen's line of Benchtop Materials Testing Machines are designed to test a wide spectrum of materials including metals, plastics, rubber, textiles, paper, yarn, wire, adhesives, ceramics, timber, foils, composites and finished components in tension, compression, flexure or shear. Maximum frame capacities from 1kN (200lbf, 100kg).
All testing hardware is fully complemented by Tinius Olsen developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application.
Capacity ranges for Benchtop Materials Testing Machines are:
Model H1K-S UTM
The 1kN (200 lbf) H1kS incorporates the latest advanced technology and quality engineering to give you the ultimate in durability, convenience, accuracy and ease of use. Powerful as a stand alone unit, the H1kS has capabilities that are enhanced by direct connection to a printer to produce a high resolution graph and comprehensive test report. The H1kS has a robust control unit with a backlit LCD display that can be positioned for optimum visibility. Test parameters are set through this console and a real time graph is displayed on the screen during the test
Model H1K-T UTM
The 1kN (200 lbf) H1kT builds on the technology and quality engineering used in the S Series to give you the ultimate in durability, convenience, accuracy and ease of use. The H1kT has the same capabilities as the S Series, but at a reduced cost. We are able to reduce the cost of the machine by eliminating the display of the S Series and talking directly to a pc running out testing software.
Model H5K-S UTM
The 5kN (1,000 lbf) single column H5kS incorporates the latest advanced technology and quality engineering to give you the ultimate in durability, convenience, accuracy and ease of use. Powerful as a stand alone unit, the H5kS has capabilities that are enhanced by direct connection to a printer to produce a high resolution graph and comprehensive test report. The H5kS has a robust control unit with a backlit LCD display that can be positioned for optimum visibility. Test parameters are set through this console and a real time graph is displayed on the screen during the test
Model H5K-T UTM
The 5kN (1,000 lbf) single column H5kT builds on the technology and quality engineering used in the S Series to give you the ultimate in durability, convenience, accuracy and ease of use. The H5kT has the same capabilities as the S Series, but at a reduced cost. We are able to reduce the cost of the machine by eliminating the display of the S Series and talking directly to a pc running out testing software.
Model H10K-S UTM
The 10kN (2000 lbf) two column H1kS incorporates the latest advanced technology and quality engineering to give you the ultimate in durability, convenience, accuracy and ease of use. Powerful as a stand alone unit, the H10kS has capabilities that are enhanced by direct connection to a printer to produce a high resolution graph and comprehensive test report. The H10kS has a robust control unit with a backlit LCD display that can be positioned for optimum visibility. Test parameters are set through this console and a real time graph is displayed on the screen during the test.
Model H10K-T UTM
The 10kN (2,000 lbf) dual column H10kT builds on the technology and quality engineering used in the S Series to give you the ultimate in durability, convenience, accuracy and ease of use. The H10kT has the same capabilities as the S Series, but at a reduced cost. We are able to reduce the cost of the machine by eliminating the display of the S Series and talking directly to a pc running out testing software.
Benchtop Materials Testing Machines 25kN – 75kN Capacity
Tinius Olsen's line of Benchtop Materials Testing Machines are designed to test a wide spectrum of materials including metals, plastics, rubber, textiles, paper, yarn, wire, adhesives, ceramics, timber, foils, composites and finished components in tension, compression, flexure or shear. All testing hardware is fully complemented by Tinius Olsen developed software that turns your hardware into a sophisticated quality analysis system. Benchtop Materials Testing Machines-25kN Capacity (5,000lbf) Model H25K-S UTM Model H25K-T UTM Model H25K-S UTM The 25kN (5,000 lbf) dual column H25kS incorporates the latest advanced technology and quality engineering to give you the ultimate in durability, convenience, accuracy and ease of use. Powerful as a stand alone unit, the H25kS has capabilities that are enhanced by direct connection to a printer to produce a high resolution graph and comprehensive test report. The H25kS has a robust control unit with a backlit LCD display that can be positioned for optimum visibility. Test parameters are set through this console and a real time graph is displayed on the screen during the test. Model H25K-T UTM The 25kN (5,000 lbf) dual column H25kT builds on the technology and quality engineering used in the S Series to give you the ultimate in durability, convenience, accuracy and ease of use. The H25kT has the same capabilities as the S Series, but at a reduced cost. We are able to reduce the cost of the machine by eliminating the display of the S Series and talking directly to a pc running out testing software. Benchtop Materials Testing Machines-50kN Capacity (10,000lbf) Model H50K-S UTM Model H50K-T UTM Model H50K-S UTM The 50kN (10,000 lbf) dual column H50kS incorporates the latest advanced technology and quality engineering to give you the ultimate in durability, convenience, accuracy and ease of use. Powerful as a stand alone unit, the H50kS has capabilities that are enhanced by direct connection to a printer to produce a high resolution graph and comprehensive test report. The H50kS has a robust control unit with a backlit LCD display that can be positioned for optimum visibility. Test parameters are set through this console and a real time graph is displayed on the screen during the test. Model H50K-T UTM The 50kN (10,000 lbf) dual column H50kT builds on the technology and quality engineering used in the S Series to give you the ultimate in durability, convenience, accuracy and ease of use. The H50kT has the same capabilities as the S Series, but at a reduced cost. We are able to reduce the cost of the machine by eliminating the display of the S Series and talking directly to a pc running out testing software. Benchtop Materials Testing Machines-75kN Capacity (15,000lbf) Model H75K-S UTM Model H75K-S UTM The 75kN (15,000 lbf) dual column H75kS incorporates the latest advanced technology and quality engineering to give you the ultimate in durability, convenience, accuracy and ease of use. Powerful as a stand alone unit, the H75kS has capabilities that are enhanced by direct connection to a printer to produce a high resolution graph and comprehensive test report. The H75kS has a robust control unit with a backlit LCD display that can be positioned for optimum visibility. Test parameters are set through this console and a real time graph is displayed on the screen during the test.
Tinius Olsen's line of Benchtop Materials Testing Machines are designed to test a wide spectrum of materials including metals, plastics, rubber, textiles, paper, yarn, wire, adhesives, ceramics, timber, foils, composites and finished components in tension, compression, flexure or shear. All testing hardware is fully complemented by Tinius Olsen developed software that turns your hardware into a sophisticated quality analysis system.
Model H25K-S UTM
The 25kN (5,000 lbf) dual column H25kS incorporates the latest advanced technology and quality engineering to give you the ultimate in durability, convenience, accuracy and ease of use. Powerful as a stand alone unit, the H25kS has capabilities that are enhanced by direct connection to a printer to produce a high resolution graph and comprehensive test report. The H25kS has a robust control unit with a backlit LCD display that can be positioned for optimum visibility. Test parameters are set through this console and a real time graph is displayed on the screen during the test.
Model H25K-T UTM
The 25kN (5,000 lbf) dual column H25kT builds on the technology and quality engineering used in the S Series to give you the ultimate in durability, convenience, accuracy and ease of use. The H25kT has the same capabilities as the S Series, but at a reduced cost. We are able to reduce the cost of the machine by eliminating the display of the S Series and talking directly to a pc running out testing software.
Model H50K-S UTM
The 50kN (10,000 lbf) dual column H50kS incorporates the latest advanced technology and quality engineering to give you the ultimate in durability, convenience, accuracy and ease of use. Powerful as a stand alone unit, the H50kS has capabilities that are enhanced by direct connection to a printer to produce a high resolution graph and comprehensive test report. The H50kS has a robust control unit with a backlit LCD display that can be positioned for optimum visibility. Test parameters are set through this console and a real time graph is displayed on the screen during the test.
Model H50K-T UTM
The 50kN (10,000 lbf) dual column H50kT builds on the technology and quality engineering used in the S Series to give you the ultimate in durability, convenience, accuracy and ease of use. The H50kT has the same capabilities as the S Series, but at a reduced cost. We are able to reduce the cost of the machine by eliminating the display of the S Series and talking directly to a pc running out testing software.
Model H75K-S UTM
The 75kN (15,000 lbf) dual column H75kS incorporates the latest advanced technology and quality engineering to give you the ultimate in durability, convenience, accuracy and ease of use. Powerful as a stand alone unit, the H75kS has capabilities that are enhanced by direct connection to a printer to produce a high resolution graph and comprehensive test report. The H75kS has a robust control unit with a backlit LCD display that can be positioned for optimum visibility. Test parameters are set through this console and a real time graph is displayed on the screen during the test.
Impact Systems - Models IT406 and IT542 Pendulum Impact Testers
Tinius Olsen manufactures a range of different pendulum impact testers that can be easily changed from a Charpy configuration to an Izod configuration. These testers come in a couple of capacities and are designed primarily for either plastics or metals impact testing. All testing hardware is fully complemented by Tinius Olsen developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application. Highly accurate and easy to use way to determine actual energy needed to initiate fracture of plastic and metallic material. Tinius Olsen's Instrumented Charpy Impact System innovative design features a high-speed system response that can accurately capture high-speed events such as the inertial rise during initial impact and brittle fracture. There are no electronic filters, which distort the actual load-time relationship. There is no need to enter large correction factors (measured force multipliers) to bring the integrated energy into agreement with the total absorbed energy as measured by the digital indicating system. Overall operational safety and testing efficiency is greatly increased by the elimination of optical triggers. Models IT406 and IT542 - Pendulum Impact Testers Tinius Olsen’s pendulum impact testers are versatile and reliable machines designed to fully comply with the specifications outlined in ASTM E23, EN10045-2 and ISO 148. Today, the Model IT406 and the Model IT542 are widely recognized as the standards of the industry for impact testing. Optional Equipment: Digital Display, Motorized Return, "Low Blow" Fixture, Lateral Expansion Gage, Electrical Brake, Instrumented Impact System for full-sized and miniature specimens. Technical References: ASTM E23; ISO 442, ISO 148 The model IT 406 provides maximum testing versatility. Easy insertion of interchangeable striking bits in the pendulum head quickly adapts the machine for either Charpy or Izod testing. A notch on the rear of the pendulum head allows optional tooling to be fitted for performing tension impact tests. A safety lock holds the pendulum in its raised position and assures a vibration-free release when activated. Once released, the pendulum quickly reaches the impact velocity of 5.47 m/s (17.0 ft/s) and has a maximum available energy of 406 J (300 ft.lbf) to impact the sample. The superior design and construction of the model IT406 ensures maximum testing accuracy and repeatability. When the machine is properly installed and leveled, the total frictional and windage losses during the pendulum swing are guaranteed not to exceed 0.5% of the energy range. Direct indication of the energy absorbed by the broken sample is given by a mechanical pointer on a graduated scale. This scale can be supplied in ft.lbf, J, or kg.m. For ease of use, a digital display can be fitted to the machine to provide more results on the test. It is recommended that this display be added at the time of order. Tinius Olsen offers a number of options to make the operation of the impact tester easier—from a simple electric brake to stop the swinging pendulum, to an automatic motorized return, eliminating the need for any operator involvement other than releasing the pendulum. The digital display is included in this last option and provides the trigger to energize the motor, which stops the swinging pendulum at the optimal position and returns it to the latched starting point. The time from pendulum release to return can be as little as 10 seconds, which means that over 400 tests per day can be made with minimal effort. Tinius Olsen can also provide a low blow fixture that allows Charpy, Izod, or tension impact tests to be performed at any of 55 velocity/energy levels from the maximum of 5.47 m/s (17.9 ft/s) down to 0.13 m/s (0.4 ft/s). For high traffic areas, Tinius Olsen can supply a complete enclosure for the machine so that the swinging hammer and broken specimens do not pose any concerns. The enclosure is completely interlocked so that the machine cannot operate unless all the guards are in place. Tinius Olsen can also supply a higher capacity model, the Model IT 542, which shares all the same features as the IT 406 except that it has an available energy of 542J (400 ft.lbf). The IT 542 is also supplied complete with the electric brake, motorized return, and digital display. Machines with a digital display can be linked to a stand alone PC with an RS232 port and connected to Tinius Olsen’s impact testing software. Key features of this software include: User-selected reporting and exporting formats. Built-in SPC programs for X-bar, R, and frequency distribution charts/histograms. Test mode allows configuring, running, and saving of tests and results. Recall mode permits viewing of previously saved results and performs database maintenance.
Tinius Olsen manufactures a range of different pendulum impact testers that can be easily changed from a Charpy configuration to an Izod configuration. These testers come in a couple of capacities and are designed primarily for either plastics or metals impact testing.
Highly accurate and easy to use way to determine actual energy needed to initiate fracture of plastic and metallic material. Tinius Olsen's Instrumented Charpy Impact System innovative design features a high-speed system response that can accurately capture high-speed events such as the inertial rise during initial impact and brittle fracture. There are no electronic filters, which distort the actual load-time relationship. There is no need to enter large correction factors (measured force multipliers) to bring the integrated energy into agreement with the total absorbed energy as measured by the digital indicating system. Overall operational safety and testing efficiency is greatly increased by the elimination of optical triggers.
Tinius Olsen’s pendulum impact testers are versatile and reliable machines designed to fully comply with the specifications outlined in ASTM E23, EN10045-2 and ISO 148. Today, the Model IT406 and the Model IT542 are widely recognized as the standards of the industry for impact testing.
Optional Equipment:
The model IT 406 provides maximum testing versatility. Easy insertion of interchangeable striking bits in the pendulum head quickly adapts the machine for either Charpy or Izod testing. A notch on the rear of the pendulum head allows optional tooling to be fitted for performing tension impact tests.
A safety lock holds the pendulum in its raised position and assures a vibration-free release when activated. Once released, the pendulum quickly reaches the impact velocity of 5.47 m/s (17.0 ft/s) and has a maximum available energy of 406 J (300 ft.lbf) to impact the sample.
The superior design and construction of the model IT406 ensures maximum testing accuracy and repeatability. When the machine is properly installed and leveled, the total frictional and windage losses during the pendulum swing are guaranteed not to exceed 0.5% of the energy range.
Direct indication of the energy absorbed by the broken sample is given by a mechanical pointer on a graduated scale. This scale can be supplied in ft.lbf, J, or kg.m. For ease of use, a digital display can be fitted to the machine to provide more results on the test. It is recommended that this display be added at the time of order.
Tinius Olsen offers a number of options to make the operation of the impact tester easier—from a simple electric brake to stop the swinging pendulum, to an automatic motorized return, eliminating the need for any operator involvement other than releasing the pendulum. The digital display is included in this last option and provides the trigger to energize the motor, which stops the swinging pendulum at the optimal position and returns it to the latched starting point. The time from pendulum release to return can be as little as 10 seconds, which means that over 400 tests per day can be made with minimal effort.
Tinius Olsen can also provide a low blow fixture that allows Charpy, Izod, or tension impact tests to be performed at any of 55 velocity/energy levels from the maximum of 5.47 m/s (17.9 ft/s) down to 0.13 m/s (0.4 ft/s). For high traffic areas, Tinius Olsen can supply a complete enclosure for the machine so that the swinging hammer and broken specimens do not pose any concerns. The enclosure is completely interlocked so that the machine cannot operate unless all the guards are in place.
Tinius Olsen can also supply a higher capacity model, the Model IT 542, which shares all the same features as the IT 406 except that it has an available energy of 542J (400 ft.lbf). The IT 542 is also supplied complete with the electric brake, motorized return, and digital display.
Machines with a digital display can be linked to a stand alone PC with an RS232 port and connected to Tinius Olsen’s impact testing software. Key features of this software include:
Model IT504 and IT503 Plastic Impact Testing Systems
Model IT504 Impact Tester for Plastics Model IT504 includes the Model 104 Digital Display/Controller for a high degree of flexibility, accuracy & test data resolution to meet all testing needs. Pick and choose optional fixtures and weights to meet the testing requirements of your material. This system does not require a separate PC and software in order to operate. However, a data acquisition/machine control software package is available as an option. The model IT 504 continues to set the industry standard for accuracy, versatility, ease of operation, and display of information with high resolution. As with the model IT 503, Izod and Charpy impact fixtures can be easily added and removed via the T-slotted block, making the IT 504 one of the most versatile machines available. Key Features: Aerodynamic compound pendulum Selectable energy units of J, in.lbf, ft.lbf, kgf.m and kgf.cm Selectable strength calculations in ft.lbf/in, J/m, in.lbf/in, kgf.m/m, ft.lbf/in2, kJ/m2, in.lbf/in2, or kgf.m/m2 Break type input options of Complete, Hinge, Partial, Non-break, and Necking Automatic or manual Toss correction Auto calibration for bearing windage and friction Automatic or manual update of specimen number Real time display of energy is available for verifying the display accuracy against traceable measurements of pendulum height and weight Optional Features: Hot and cold chambers Instrumentation package for impact testing Separate 1J and 0.5Jhammers Model IT503 Impact Tester This system does not require a separate PC and software in order to operate. However, a data acquisition/machine control software package is available as an option. The new model IT 503 plastics impact tester, together with the model 92T, continues to set the industry standard for versatility, ease of operation, and display of information with high resolution. These machines are capable of determining the impact strength using either a Charpy or Izod configuration, without changing the pendulum. The user attaches the appropriate striking tup on the pendulum and the specimen clamp or anvils in the base of the unit, to test plastics in accordance with ASTM D256 (Izod impact), ISO 179 (Charpy impact), ISO 180 (Izod impact), ASTM D6110 (Charpy Impact), ASTM D4812 (Unnotched Cantilever Beam Impact), ASTM D4508 (Chip Impact), ASTM D950 (Adhesive Bond Impact), and other similar standards. The aerodynamically designed compound pendulum provides maximum rigidity in the direction of the impact and virtually eliminates any windage losses. Pendulum capacity is easily changed by adding on any one of seven optional weight sets. The energy absorbed in breaking the specimen can be configured in SI, metric, or English units and is determined by an optical encoder mounted on the shaft of the machine and is based on the latched height of the hammer (relative to the zero potential energy point), the maximum post-impact height of the hammer, and the frictional losses of the machine. Energies of less than 0.03% of the pendulum capacity can be resolved and this resolution is vastly superior to dial type displays and other currently available displays. Both the IT 503 and 92T come with a standard “low blow” feature. This provides a convenient and reliable means for releasing the pendulum from a lower than usual height, allowing testing at lower impact velocities and energy levels. Additionally, the model IT 503 is supplied with all necessary safety shielding to protect the operator and bystanders from the broken samples. To make impact testing on plastics easier and more flexible, the machines can be connected to a pc running Tinius Olsen’s impact software. Key Features: Aerodynamic compound pendulum that can accommodate weights to increase test capacity Interlocked safety doors to ensure pendulum cannot be released with these doors open Simple and rapid change between Izod and Charpy test setup Conforms to all applicable European CE Directives Optional Features: Automatic braking system for increased safety and higher throughput Motorized pendulum return for added safety Pneumatic Izod clamping system for higher test repeatability Pneumatic specimen rack and feed system for more automated testing Hot and cold chambers for testing at different temperatures
Model IT504 includes the Model 104 Digital Display/Controller for a high degree of flexibility, accuracy & test data resolution to meet all testing needs. Pick and choose optional fixtures and weights to meet the testing requirements of your material.
This system does not require a separate PC and software in order to operate. However, a data acquisition/machine control software package is available as an option.
The model IT 504 continues to set the industry standard for accuracy, versatility, ease of operation, and display of information with high resolution.
As with the model IT 503, Izod and Charpy impact fixtures can be easily added and removed via the T-slotted block, making the IT 504 one of the most versatile machines available.
Key Features:
Optional Features:
The new model IT 503 plastics impact tester, together with the model 92T, continues to set the industry standard for versatility, ease of operation, and display of information with high resolution.
These machines are capable of determining the impact strength using either a Charpy or Izod configuration, without changing the pendulum. The user attaches the appropriate striking tup on the pendulum and the specimen clamp or anvils in the base of the unit, to test plastics in accordance with ASTM D256 (Izod impact), ISO 179 (Charpy impact), ISO 180 (Izod impact), ASTM D6110 (Charpy Impact), ASTM D4812 (Unnotched Cantilever Beam Impact), ASTM D4508 (Chip Impact), ASTM D950 (Adhesive Bond Impact), and other similar standards.
The aerodynamically designed compound pendulum provides maximum rigidity in the direction of the impact and virtually eliminates any windage losses. Pendulum capacity is easily changed by adding on any one of seven optional weight sets.
The energy absorbed in breaking the specimen can be configured in SI, metric, or English units and is determined by an optical encoder mounted on the shaft of the machine and is based on the latched height of the hammer (relative to the zero potential energy point), the maximum post-impact height of the hammer, and the frictional losses of the machine. Energies of less than 0.03% of the pendulum capacity can be resolved and this resolution is vastly superior to dial type displays and other currently available displays.
Both the IT 503 and 92T come with a standard “low blow” feature. This provides a convenient and reliable means for releasing the pendulum from a lower than usual height, allowing testing at lower impact velocities and energy levels. Additionally, the model IT 503 is supplied with all necessary safety shielding to protect the operator and bystanders from the broken samples.
To make impact testing on plastics easier and more flexible, the machines can be connected to a pc running Tinius Olsen’s impact software.
Impact Specimen Notcher
Impact Specimen Notcher Model 899 Tinius Olsen manufactures Impact Specimen Notchers that can be easily changed from a Charpy configuration to an Izod configuration. Easily and precisely notch test specimens for Izod and Charpy testing of plastic materials to ASTM and ISO specifications All testing hardware is fully complemented by Tinius Olsen developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application. The Tinius Olsen Model 899 Impact Specimen Notcher for Plastics is designed to machine a notch in a plastic specimen in accordance with ISO 179, ISO 180, ASTM D256 and ASTM 6110. Features: Conforms to ASTM D256 & D6110; ISO 179 & 180 Variable cutter speed, Variable speed table feed rate. Air cooled notching area Replaceable diamond- tipped cutter Prior to performing tests, the specimens must be notched in order to create a stress riser and to predict the point of fracture. The Tinius Olsen Model 899 Impact Specimen Notcher for plastics can accurately machine up to 28 3.2mm (1/8”) thick specimens at one time. The Model 899 Specimen Notcher features an air cooling system that directs air flow at the cutting area to reduce the risk of thermal degradation of the specimens. A clear safety cover over the cutting area protects the operator, while doubling as an attachment for a vacuum system (not supplied) to remove chips from the cutting area. Routine operation of the Model 899 Impact Specimen Notcher is automated and requires minimal operator supervision. After samples are loaded, the operator initiates the automatic notching cycle by simply pressing a button. After the notching process is completed, the notch depth can be verified by using the Model 799 Notch Depth Verification Device. Impact Software Features: User-selected reporting and exporting formats Built-in SPC programs for X-bar, R, and frequency distribution chart/ histograms Test mode allows configuring, running, and saving of tests and results Recall mode permits viewing of previously saved results and performs database maintenance
Tinius Olsen manufactures Impact Specimen Notchers that can be easily changed from a Charpy configuration to an Izod configuration. Easily and precisely notch test specimens for Izod and Charpy testing of plastic materials to ASTM and ISO specifications
The Tinius Olsen Model 899 Impact Specimen Notcher for Plastics is designed to machine a notch in a plastic specimen in accordance with ISO 179, ISO 180, ASTM D256 and ASTM 6110.
Features:
Prior to performing tests, the specimens must be notched in order to create a stress riser and to predict the point of fracture. The Tinius Olsen Model 899 Impact Specimen Notcher for plastics can accurately machine up to 28 3.2mm (1/8”) thick specimens at one time.
The Model 899 Specimen Notcher features an air cooling system that directs air flow at the cutting area to reduce the risk of thermal degradation of the specimens. A clear safety cover over the cutting area protects the operator, while doubling as an attachment for a vacuum system (not supplied) to remove chips from the cutting area.
Routine operation of the Model 899 Impact Specimen Notcher is automated and requires minimal operator supervision. After samples are loaded, the operator initiates the automatic notching cycle by simply pressing a button.
After the notching process is completed, the notch depth can be verified by using the Model 799 Notch Depth Verification Device.
Impact Software Features:
:: IDS Emergency Management :: IDS Water ::IDS Publishing / Media::IDS Healthcare Management::IDS Environment::IDS Plastics::IDS Power/Energy::
Industry IDS, Inc. – Online Tradeshow, Exhibition, & Buyers Guide Solutions
