The T1000 series of pulp moulding machines is specifically designed to fit the needs of the small manufacturer, whether it is for food products or electronic interior packaging.
As all the wetted parts of the machine are built from stainless steel and because all the bearings, both static and moving, have automatic greasers, the T series all have very low maintenance and long life spans.
A single pass dryer and its tray conveyor is another key factor in success. The dryer must be capable of removing water with minimal distortion to the product. This means that the only time a product changes position is after it is completely dry or after it leaves the hot presses to be printed. The final stage is counting, stacking, and bundling the products for delivery to customers.
T1002 SFL54 Pulp Moulding Machine for Egg Cartons and Electronic Interior Packaging
The small producer`s problem-solving machine! If you have trouble with reliability of supply for your packaging needs, consider this little machine. It is designed for small production volumes. For example, for a product the size, complexity, and thickness of an egg carton or electronic interior packaging, this machine can handle approximately 10 million units per year. Or if you need a large product, it will handle moulded fibre products up to 15 inches by 52.5 inches by 5 inches deep by 1/16 inch thick, producing about 5 of these per minute, or about 43,000 of these large elements per year.
This machine is effective and environmentally friendly. There is no effluent, except the evaporation in drying, and even that is recovered as much as possible. If you need to hot press and print your products for the retail market, we can provide the best quality egg carton hot presses and printers in the world. In this configuration, you would need 1 hot press and 1 printer to handle the volume.
T1002 SFL67.5 Pulp Moulding Machine for Moulded Fibre Products
Another problem-solving machine for the small producer! If you have trouble with reliability of supply for your packaging needs, consider this little machine. It is designed for small production volumes. For example, for a product the size and complexity of an egg tray, this machine can handle approximately 13 million units per year. Or if you need a large product, it will handle moulded fibre products up to 15 inches by 66 inches by 5 inches deep by 1/16 inch thick, producing about 5 of these per minute, or about 43,000 of these large elements per year.
This machine is effective and environmentally friendly. There is no effluent, except the evaporation in drying, and even that is recovered as much as possible. If you need to press and print your products for the retail market, we can provide the best quality hot presses and printers in the world. In this configuration, you would need 1 hot press and 1 printer to handle the volume.
