NEW RADIAL SPINNER SYSTEM
The new Radial Spinner System applies consistent amounts of adhesives, lubricants and other production fluids inside cylindrical parts between 0.4`` and 5`` in diameter.
The Radial Spinner System combines a compact air-driven motor, low-maintenance EFD dispense valve and ValveMateª controller. The valve dispenses a precisely metered amount of fluid onto a spinning disk attached to the motor. As fluid reaches the edge of the disk it spins off, forming a neat band inside the part.
Click here for more information
ACCURATE XYZ DISPENSING SYSTEMS
New Ultra® TT Automation Series combines precision dispensing and accurate positioning functions into one fully integrated, compact tabletop unit. The right deposit, in the right place — every time.
It`s the only XYZ dispensing system programmed with the Palm™ handheld.
NEW ASEPTIC DIAPHRAGM VALVE FOR STERILE FLUID APPLICATIONS
The 754V-SS is designed to meet the need for a sterile, low-maintenance dispense valve for life sciences, pharmaceutical, and food applications.
To conform to biopharmaceutical regulations and allow for Clean-in-Place (CIP) and Steam-in-Place (SIP) processes, the valve`s wetted components are made of 316L stainless steel and Teflon®. Internal threads have been removed to provide a smooth, easily cleaned fluid flow path free of entrapment - critical for sterile and aseptic fluid applications.
ULTRA® TT AUTOMATION SERIES
Accurate XYZ Dispensing Systems. New Ultra® TT Automation Series combines precision dispensing and accurate positioning functions into one fully integrated, compact tabletop unit. The right deposit, in the right place - every time.
It`s the only XYZ dispensing system programmed with the Palm™ handheld.
New Aseptic Diaphragm Valve for Sterile Fluid Applications
The 754V-SS is designed to meet the need for a sterile, low-maintenance dispense valve for life sciences, pharmaceutical, and food applications.
To conform to biopharmaceutical regulations and allow for Clean-in-Place (CIP) and Steam-in-Place (SIP) processes, the valve`s wetted components are made of 316L stainless steel and Teflon®. Internal threads have been removed to provide a smooth, easily cleaned fluid flow path free of entrapment - critical for sterile and aseptic fluid applications.
NO MESS LUBE CONTROL
Apply uniform amounts of grease without drooling, cleanup or rework. EFD valve systems are simple to set up and designed for low maintenance.
ProcessMate™ 5000 - BENCHTOP CENTRIFUGE REMOVES TRAPPED AIR FROM SYRINGES
EFD`s ProcessMate™ 5000 universal centrifuge is a fast, simple, cost-effective way to remove entrapped air bubbles and air pockets from fluid packaged in syringes such as two-part epoxy, frozen epoxy, RTV, grease and other assembly fluids. Centrifuging syringes prior to air-powered or mechanical dispensing will dramatically improve process control in critical applications and reduce rejected parts.
ProcessMate™ 6100 - NEW ProcessMate™ 6100 HOT AIR REFLOW SYSTEM
This digital bench top reflow system uses an active feedback loop to accurately control air temperature to ± 5ºC. Temperature ranges from 100ºC to 480ºC adjustable in 1ºC increments. The diaphragm pump provides an adjustable, repeatable, constant air flow..
When used with EFD SolderPlus® dispensing solder paste, the ProcessMate 6100 reduces operator variability, rework and scrap while increasing productivity and production yields without special training requirements typical of wire-and-iron soldering.
Click here to view brochure
