7200 Series Low Profile Stainless Steel Belt Conveyors
Specifications:
- Belt widths: 1.75``(44) - 18`` (457)
- Lengths: 2` (610) - 18` (8486) in .12`` (4) increments
- Pulley diameter: 1.25`` (32)
- Load capacity: 60 lbs (27kg)
- Materials: 304 stainless frame, headplates and pulleys
Features & Benefits:
- One piece stainless steel frame
- 1.25`` (32) diameter pulley for small parts transfer
- Internal rack & pinion belt tensioning is fast and easy
- Bearings filled with H2 solid lubricant for long life
- Large stainless steel sealed spherical bearings (28mm diameter) for long-term durability
- V-guided belt option requires no tracking adjustments
- Quick belt removal for easy cleaning
- All surfaces designed for optimum water drainage
Standard Options
- Bottom Wiper
- Tool-less Belt Change Handles for quick belt release
View image.
7300 Series Low Profile Stainless Steel Belt Conveyors
Specifications:
- Belt widths: 1.75``(44) - 18`` (457)
- Lengths: 2` (610) - 18` (8486) in .12`` (4) increments
- Pulley diameter: 1.25`` (32)
- Load capacity: 60 lbs (27kg)
- Materials: 304 stainless frame, headplates and pulleys
Features & Benefits:
- 1.25`` (32) diameter pulley for small parts transfer
- Internal rack & pinion belt tensioning is fast and easy
- Bearings filled with H2 lubricant and equipped with high pressure cap
- Oversized stainless steel sealed spherical bearings (45mm diameter) for long-term durability
- V-guided belt requires no tracking adjustments.
- Quick belt removal for easy cleaning
- All surfaces designed for optimum water drainage
Standard Options:
- Bottom Wiper
- Tool-less Belt Change Handles for quick belt release
View image.
7400 Series Conveyors
7400 SERIES Straight Plastic Chain Specifications:
- Belt widths: 6`` to 60`` (152mm to 1524mm)
- Lengths: 36`` (914) to 999`` (25.4m)
- Load: 20 lbs /square foot of belt (90 kg / square meter of belt)
- Belt speed: 233 ft/min maximum (71 meters/min)
- Frame material is 304 stainless steel
- Bearing material is 400 stainless steel
- Bearing lubricant is H1 type FDA lubricant
- Wear Strip Material is solid UHMW
- Welds are continuous TIG
- Flat and Cleated Plastic Chain options available
7400 SERIES Curved Plastic Chain Specifications:
- Belt widths: 8`` to 36`` (152mm to 914mm)
- Total Lengths: up to 99` (914mm – 30m)
- Load up to 20 lbs /square foot of belt (90 kg / square meter of belt)
- Belt speed: 175 ft/min maximum (53 meters/min)
- Frame material is 304 stainless steel.
- Degree of curves: 15º - 180º
> 8`` and 10`` widths available in 30º increments
> 12`` through 36`` widths available in 15º increments
Features & Benefits:
- Frame is constructed of continuous TIG welded 304 stainless steel and is designed with no horizontal surfaces for optimum cleaning
- All bearings are 400 stainless steel, filled with H1 FDA lubricant and mounted in cast stainless steel housings for maximum performance in washdown environments
- Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
- Belt tracking mechanism is constructed of 304 stainless steel and is externally mounted to the frame with adequate clearances for cleaning. No external threads are used
- Conveyor is designed to withstand high pressure (100-1500 PSI) spray and chlorinated solutions
IMPAC 100 Motor Controller - Industrial Multi-Purpose Application Controller
Specifications:
- NEMA 12/IP54 enclosure
- Touchsafe, 24VDC control circuit
- Motor starter with adjustable overload
- Lockable disconnect switch
- Controls up to 12 Amp motors
- Fixed and variable speed models for single and three phase operation
Features/Benefits:
- Over 60 preconfigured control applications for easy selection, set-up and use.
- Pre-tested off the shelf components ensure operational reliability
- Standardized control design for consistent service and control upgrades
- Easily installable with simple step by step instructions
Accessories: Standard IMPAC Accessories are available for Indexing, Jogging, Push Buttons, Accumulation Stations, Merging and Emergency Stop
Industries Served:
- Fabricated Metal Products
- Manufacturing
- Rubber and Plastics
- Chemical and Allied Products
- Instrumentation
- Electronic Assembly
- OEM and Integrators
Applications:
- Packaging
- Print Label Marking
- Manual and Automated Assembly
- Plastic Molding
- Sortation
- Testing and Inspection
- Machine Part Handling
- Curing, Cooling, Heating, Cleaning
- Clean Room
Support Stands
Aluminum Support Stands
The new aluminum support stands are taller, 25% stronger and lower cost than previous models. The new stands feature t-slots for easier mounting, widths from 12-48 inches, heights from 7-99 inches, caster options and an integrated height indicator for faster set-up.
Stainless Steel Support Stands
The new stainless steel stands have been designed for wash down environments and optimum drainage.The stands come in two models, one for supporting conveyors in a horizontal position and a pivoting model for incline and decline installations. Both models come with pivoting feet to accommodate sloped floors.
|
|
