FANUC ROBOTICS AMERICA, INC.

Robots I

ARC Mate 100iBe Series Robots

This series includes the following models:

• ARC Mate 100iB/6s
• ARC Mate 100iBe

- Application-Arc Welding
- Load - 6 kg, 6 kg
- Reach- 951mm, 1373mm
- Repeatability- ±0.08mm, ±0.08mm

ARC Mate 100iBe, 120iBe Robots

This series includes the following models:

• ARC Mate 100iBe
• ARC Mate 120iBe

- Application-Arc Welding
- Load- 6 kg, 20kg
- Reach-1373mm, 1667mm
- Repeatability-±0.08mm, ±0.08mm

ARC Mate 120iB/10L Robots

- Application-Spot Welding
- Load-10 kg
- Reach-1885mm
- Repeatability-±0.1mm

ARC Mate 120iB/10LT Robots

- Application-Arc Welding
- Load-10 kg
- Reach-1613mm
- Repeatability-±0.1mm

Arc Welding Solution Arm

- Application-Arc Welding
- Repeatability-±0.08mm

Cleanroom Robots

This series includes the following models:

• LR Mate 200iB
• M-6iB

- Application-Material Handling, Assembly, Dispensing, Machine Tending/Part Transfer
- M-6iB can handle a full FOUP containing 25, 300mm wafers and an end-effector.
- Load-3 kg, 6 kg
- Reach- 700mm, 1373mm
- Repeatability-±0.04mm, ±0.08mm

F-200iB Robots

- Application-Spot Welding, Dispensing, Machine Tending/Part Transfer, Material Removal
- Load-100 kg
- Reach-437mm x 1040mm work envelope
- Repeatability-±0.1mm

Food Grade Robots

This series includes the following models:

• M-420iA Food
• LR Mate-200iB/5WP

- Application-Palletizing/Picking/Packing
- Load-40 kg, 3-5 kg
- Reach-1855mm, 700mm
- Repeatability-±0.5mm, ±0.4mm

Intelligent Robots with FANUC Force Sensors

The Intelligent Robot series includes the following models:

• Intelligent Robot M-16iB
• Intelligent Robot M-710iB

- Application-Assembly, Material Handling
- Load-3-5 kg, 20 kg, 70 kg
- Reach-620mm, 1885mm, 1893mm
- Repeatability-±0.04mm, ±0.08mm, ±0.07mm

LR Mate Series Robots

R-J3iB Mate Controller series includes the following:

• LR Mate 100iB
• LR Mate 200iB
• LR Mate 200iB/3L

- Application-Machine Tending/Part Transfer, Assembly, Dispensing, Material Handling, Material Removal
- Load-3-5 kg, 3-5 kg, 3 kg
- Reach-620mm, 700mm, 856mm
- Repeatability-±0.04mm, ±0.04mm, ±0.04mm

LR Mate 200iB/5WP Series Robots

This series includes the following models:

• LR Mate 200iB/5WP waterproof
• LR Mate 200iB/5P high precision
• LR Mate 200iB/5WP food
• LR Mate 200iB/5WP cleanroom

- Application-Palletizing/Picking/Packing
- Load-3-5 kg, 3-5 kg, 3-5 kg, 3-5 kg
- Reach-700mm
- Repeatability-±0.04mm

LR Mate 200iC Robots

- Application-Machine Tending/Part Transfer, Assembly, Dispensing, Material Handling, Material Removal
- Load-5 kg
- Reach-704mm
- Repeatability-±0.02mm

M-6iB Series Robots

This series includes the following:

• M-6iB
• M-6iB/6S
• M-6iB/6S

- Application-Material Handling, Dispensing, Machine Tending/Part Transfer, Material Removal
- Load-6 kg, 10 kg
- Reach-1373mm, 951mm, 951mm
- Repeatability-±0.08mm

Robots II

M-16iB Series Robots

This series includes the following models:

• M-16iB/20
• M-16iB/10L

- Application-Machine Tending/Part Transfer, Assembly, Dispensing, Material Handling, Material Removal, Palletizing/Picking/Packing
- Load-20 kg, 10 kg,
- Reach-1667mm, 1885mm
- Repeatability-±0.08mm, ±0.10mm

M-16iB/T Series Robots

This series includes the following models:

• M-16iB/10LT
• M-16iB/20T

- Application-Dispensing, Machine Tending/Part Transfer, Material Handling, Palletizing/Picking/Packing
- Load-10 kg, 20 kg
- Reach-1735mm, 1517mm
- Repeatability-±0.10mm, ±0.10mm

M-410iB Series Robots

This series includes the following models:

• M-410iB/160
• M-410iB/300
• M-410iB/450

- Application-Machine Tending/Part Transfer, Material Handling, Palletizing/Picking/Packing
- Load-160 kg, 300 kg, 450 kg
- Reach-3143mm, 3143mm, 3130mm
- Repeatability-±0.5mm, ±0.5mm, ±0.5mm

M 420iA Series Robots

This series includes the following:

• M-420iA and M-420iA Food
• M-421iA

- Application-Palletizing/Picking/Packing, Assembly, Machine Tending/Part Transfer
- Load-40 kg, 50 kg
- Reach-1855mm, 1855mm
- Repeatability-±0.5mm, ±0.5mm

M-710iC Series Robots

This series includes the following models:

• M-710iC/50
• M-710iC/70

- Application-Material Handling, Dispensing, Machine Tending/Part Transfer
- Load-50 kg, 70 kg
- Reach-2050mm, 2050mm
- Repeatability-±0.07mm, ±0.07mm

M-710iC/20L Robots

- Application-Arc Welding, Material Handling
- Load-20 kg
- Reach-3110mm
- Repeatability-±0.15mm

M-710iC/T Series Robots

This series includes the following models:

• M-710iC/50T
• M-710iC/70T

- Application-Material Handling, Dispensing, Machine Tending/Part Transfer
- Load-50 kg, 70 kg
- Reach-1900mm, 1900mm
- Repeatability-±0.07mm, ±0.07mm

M-900iA Series Robots

This series includes the following models:

• M-900iA/350
• M-900iA/260L
• M-900iA/600

- Application-Material Handling, Material Removal, Spot Welding
- Load- 350 kg, 260 kg, 600/700 kg
- Reach-2650mm, 3100mm, 2832mm
- Repeatability-±0.3mm, ±0.3mm, ±0.4mm

P-10 Opener Robots

- Application-Painting, Coating
- Load-22.7 kg
- Reach-1932mm
- Repeatability-N/A

P-15 Opener Robots

- Application-Painting, Coating
- Load-20.4 kg
- Reach-2331mm
- Repeatability-N/A

P-50i Robots

- Application-Painting, Coating, Dispensing
- Load-7.5 kg
- Reach-1360mm
- Repeatability-±0.2mm

P-200E System

- Application-Painting, Coating
- Load-30 kg
- Reach-2800mm
- Repeatability-±0.5mm

P-200T Robots

- Application-Painting, Coating
- Load-15 kg
- Reach-2308mm
- Repeatability-±1mm

P-500 Robots

- Application-Painting, Coating
- Load-15 kg
- Reach-2600mm
- Repeatability-±0.5mm

R-2000iA Series Robots

This series includes the following models:

• R-2000iA/165F
• R-2000iA/210F
• R-2000iA/200F
• R-2000iA/125L
• R-2000iA/165R
• R-2000iA/200R
• R-2000iA/100P
• R-2000iA/130U

- Application-Spot Welding, Dispensing, Machine Tending/Part Transfer, Material Removal, Arc Welding
- Load-165 kg, 210 kg, 200 kg, 125 kg, 165 kg, 200 kg, 100 kg, 130 kg
- Reach-2650mm, 2650mm, 2650mm, 3001mm, 3095mm, 2928mm, 3500mm, 2650mm
- Repeatability-±0.3mm

R-2000iB/200T Robots

- Application-Spot Welding, Dispensing, Machine Tending/Part Transfer, Material Removal
- Load-200 kg
- Reach-2207mm
- Repeatability-±0.3mm

R-2000iA/EW Series Robots

This series includes the following models:

• R-2000iA/165EW
• R-2000iA/200EW

- Application-Material Handling, Spot Welding
- Load-165 kg, 200 kg
- Reach-2650mm, 2650mm
- Repeatability-±0.3mm, ±0.3mm

R-2000iB Series Robots

This series includes the following models:

• R-2000iB/165F
• R-2000iB/210F
• R-2000iB/125L
• R-2000iB/175L
• R-2000iB/165R
• R-2000iB/200R
• R-2000iB/100P

- Application-Spot Welding, Dispensing, Machine Tending/Part Transfer, Material Removal, Arc Welding
- Load-165 kg, 210 kg, 125 kg, 175 kg, 165 kg, 200 kg, 100 kg
- Reach-2655mm, 2655mm, 3005mm, 2852mm, 3095mm, 3095mm, 3500mm
- Repeatability-±0.2mm, ±0.3mm, ±0.2mm, ±0.3mm, ±0.3mm, ±0.3mm, ±0.3mm

S-500iB Robots

- Application-Dispensing, Arc Welding, Machine Tending/Part Transfer, Material Handling, Material Removal
- Load-15 kg
- Reach-2757mm
- Repeatability-±0.15mm

Robotic Controller Software I

ArcTool Application Software

The ArcTool application software package, integrated with a FANUC robot and controller, provides the user with a unique process solution for robotic arc welding requirements.

ArcTool Quality Functions

The ArcTool application software package offers many options to diagnose problems and improve the quality of the production process.

Diagnostic Resource Center

The Diagnostic Resource Center (DRC) is an easy-to-use diagnostic interface or "troubleshooting tool" that allows both beginners and advanced users to diagnose controller problems quickly and efficiently. The DRC provides access to an extensive library of diagnostic information, photos, and circuit diagrams for FANUC Robotics' controllers.

eLearn Training

Robot Operations Web-based training (WBT) is the first of a series of Web-based courses that will be available to customers by subscription through the FANUC Robotics' Customer Resource Center (cRc) Web site.

HandlingTool Application Software

FANUC Robotic's HandlingTool software integrated with a FANUC robot and controller provides an effective process solution for most material handling, material removal and assembly applications. HandlingTool simplifies the setup, programming, and operation of FANUC robots. Built-in macro functions, menu-driven programming tools and point-and-shoot position teaching features allow users to create robot application programs, test an application and run production with minimal training and programming experience.

HandlingWorks

HandlingWorks is a networking software tool that allows users to monitor R-J3 robot systems from a remote PC. It provides a simple and graphical interface to handle day-to-day production and maintenance of R-J3 robot systems. HandlingWorks takes advantage of the built-in Ethernet communications feature of the R-J3 robots to provide an open interface between the robot and PC, allowing the transfer of information between a PC and R-J3 robot. HandlingWorks is flexible enough to support all material handling applications including machine loading, palletizing, packing and material removal.

KAREL

KAREL is an application development software package integrated with a FANUC robot and SYSTEM R-J3iB Controller. KAREL is powerful enough to handle virtually any robotic handling, processing or assembly application.

OlpcPRO

FANUC Robotics' OlpcPRO is a state-of-the-art offline robot program development software designed for FANUC SYSTEM R-J3iB™ and R-30iA™ robots. It supports offline development and maintenance of both KAREL® and Teach Pendant Programming (TPP) used by the FANUC SYSTEM R-J3iB and R-30iA Controllers. 

PaintTool

The PaintTool application software package, integrated with a FANUC Robot and SYSTEM R-J3 Controller, provides the user with a process solution that meets both industrial and automotive painting and coating needs. PaintTool simplifies the setup and operation of FANUC Robots. Little or no previous programming or operating experience is required. Standard configurations provide fast and easy robot integration, path teaching and production startup. PaintTool can be easily integrated with a cell controller (PLC) or may run in a stand-alone mode.

PAINTworks III

FANUC Robotics' PAINTworks III provides the necessary tools for an integrated paint shop control system. Offering centralized cell level control, PAINTworks III interfaces with all paint booth automation equipment including robots, reciprocators and bell zones. PAINTworks III is also used with robotic sealing and dispensing systems offering a continuous control architecture for the entire paint shop.

PC Developer's Kit

FANUC Robotics PC Developer's Kit is a powerful tool that enables high performance communication of information and instructions between a PC and FANUC System R-J3 and R-J3iB Controllers. The kit is both a development and run-time environment that gets the MS Windows™ application running quickly. Visual Basic programming expertise is required to develop application packages over PC Developers Kit.

PC File Services

FANUC Robotics' PC File Services for Microsoft Windows NT and Windows 2000 provides an easy-to-use file management capability for FANUC robots. It allows users to backup and restore robot application files to a Personal Computer (PC) via Ethernet. PC File Services uses File Transfer Protocol (FTP) to transfer robot programs, variable files, data files and system files to SYSTEM R-J3, R-J3iB and R-J2 (with V4.40 software) robots.

PRESSworks

The PRESSworks operating system package is designed to optimize the performance, throughput, uptime and ease of use of a tandem press line. FANUC Robotics developed the supervisor, line controller and robotic software to focus on the specific needs of the press room. FANUC Robotics worked very closely with key first- and second-tier automotive plant and engineering personnel to develop the system control, error recovery, root cause analysis, system setup screens and operator interfaces. The control operating system, married with a FANUC Robotics robotic transfer system, can increase system uptime (manned yield) by 15 to 25 percent more than a traditional automation solution. This can increase net part throughput by thousands of part per year.

Robotic Controller Software II

Random Order PalletTool

FANUC Robotics designed Random Order PalletTool to automate mixed unit load palletizing. When integrated with a FANUC robot and System RJ-3 Controller, Random Order PalletTool provides an efficient method of setting up, controlling and monitoring mixed palletizing applications. Random Order PalletTool builds upon FANUC Robotics' proven PalletTool® software.

RemovalTool

RemovalTool application software, integrated with a FANUC robot, SYSTEM R-J3 or R-J3iB Controllers and a force control device, provides the user with a cost-effective solution for robotic surface and edge finishing applications.

R-J3/R-J3iB Integrated PMC

The R-J3 and R-J3iB Integrated PMC (Programmable Machine Control) Software option provides the ability to execute a ladder logic program on the R-J3 and R-J3iB Controller. PMC allows R-J3 and RJ3iB Controllers to operate external devices via ladder logic programs, potentially eliminating the need for an external PLC or Soft PLC in small systems.

ROBOGUIDE Handling PRO

Handling PRO is a member of FANUC Robotics' ROBOGUIDE family of offline robot simulation software products built on the Virtual Robot Controller. Handling PRO allows users to simulate a robotic process in 3-D space or conduct feasibility studies for robotic applications without the physical need and expense of a prototype work cell setup.

ROBOGUIDE-PaintPRO Software

FANUC Robotics' PaintPRO software is a graphical offline programming solution that simplifies robotic path teaching and paint process development. PaintPRO is specifically designed to create paths that can be utilized by FANUC Robotics' PaintTool application software.

ROBOGUIDE-PalletPRO and PalletTool

The ROBOGUIDE-PalletPRO and PalletTool palletizing simulation package helps save time and expense for the development and integration of robotic palletizing and depalletizing systems. ROBOGUIDE-PalletPRO and PalletTool is built on the FANUC Robotics' Virtual Robot Controller and is a plug-in option to ROBOGUIDE, FANUC Robotics' simulation software. It is also available as a stand-alone package for palletizing integrators and end users.

ROBOGUIDE-WeldPRO

WeldPRO, FANUC Robotics' latest plug-in to the ROBOGUIDE off-line programming tool, allows users to simulate a robotic arc welding process in 3-D space. Driven exclusively by a FANUC Robotics Virtual Robot Controller, WeldPRO is empowered with the most accurate program teaching tools and cycle time information available in any simulation package.

Shape Generation

Shape Generation is a cutting utility specifically designed to simplify the setup, programming and touch-up of two-dimensional shapes. The typical method for programming a robot to cut shapes accurately requires teaching dozens of individual points and is often a time consuming trial and error process. FANUC Robotics' Shape Generation requires only one taught point and a specified shape size, significantly reducing programming time.

SpotTool+

The SpotTool+ application software package, integrated with a FANUC Robot and SYSTEM R-J3 Controller, provides a spot welding specific solution for body shop and general industrial robotic applications. SpotTool+ is designed to simplify and standardize the setup and operation of FANUC robots used in body shop applications, including spot welding and dispensing. Built-in functions typical to body shop applications are provided, allowing the operator to easily teach positional data and logical sequences using familiar terms and menu-prompted commands. Full functionality is provided at the teach pendant for setup, operation and troubleshooting, including diagnostics, status reporting and error recovery information.

SYSTEM R-J3 Networking Software

FANUC Robotics SYSTEM R-J3 Controllers contain a built-in 10BaseT Ethernet port. This interface, combined with a dedicated communications processor, allows FANUC Robotics to offer advanced networking software tools to connect R-J3 Controllers to other robots and remote computers over an Ethernet network. FANUC Robotics also supports network communication through a serial port using the Point to Point Protocol (PPP). These software tools make it simple for you to transfer robot programs, monitor robot operation, collect production data and troubleshoot from a remote computer.

SYSTEM R-J3iB Networking Software

FANUC Robotics' SYSTEM R-J3iB Controllers offer advanced networking software tools to connect robots and remote computers over an Ethernet network. FANUC Robotics also supports network communication through an external modem using the Point to Point Protocol (PPP).

Through Arc Seam Tracking (TAST)

Through Arc Seam Tracking (TAST) automatically adjusts the robot's vertical and lateral trajectory to compensate for part warping or misplacement.

TorchMate 3 Software Option

The TorchMate 3 software option provides a low cost, easy-to-use solution for automatic adjustment of the Tool Center Point (TCP). TorchMate 3 automatically compensates for bent torch barrels and worn contact tips to reduce weld repair and increase system uptime.

Industrial Robot Vision and Options

Arc Welding Solution Arm

FANUC Robotics' Arc Welding Solution Arm provides many advantages over a conventional robotic torch configuration. The Dress-out Package eliminates the typical torch offset, increasing the stability and reliability of the torch cable assembly. Increased arc density is easily achieved with two or more robots working closely together without interference.

AccuChop

AccuChop is a process control package used in fiberglass lay-up applications which provides features for resin and glass delivery rate control and display, as well as various detection alarms. AccuChop is designed for both gelcoat (resin and catalyst) and chopped fiberglass (resin, catalyst and glass) applications. Both resin flow and glass feed can operate under open loop or closed loop control. The functionality provided also handles error recovery events and does not require PLC logic to spray parts.

AccuDeflash

FANUC Robotics developed AccuDeflash, an innovative patented process for robotic deflashing and trimming of a wide variety of plastic parts. The process utilizes the speed, repeatability and reliability advantages of FANUC robots to provide a consistent automated process. The process allows a robot to deflash and trim plastic parts that may vary in size or shape. AccuDeflash is successful because it tolerates part-to-part variations.

ACCUFLOW

ACCUFLOW is a closed loop fluid delivery control system providing quality paint performance improvements for use with FANUC Robotics' finishing systems. ACCUFLOW's ability to correct for dynamic changes in fluid pressure, viscosity and other flow parameters provides consistent, repeatable fluid delivery volume.

ACCUmist

ACCUmist is a process control package used in die spray applications which provide features for precision delivery of die spray as well as interactive process control and monitoring. Unlike traditional flooding-style die sprays, ACCUmist process control capability allows the die caster to make the necessary adjustments to avoid overspray die problems such as under/over cooling and improve productivity by reducing downtime for die maintenance and die repair.

Adaptive Welding

FANUC Robotics has taken its proven arc welding process technology and combined it with the joint sensing capabilities of the Servo Robot sensor to offer a real time adaptive welding process. Operating within the ArcTool application software is a user-definable adaptive algorithm that utilizes sensor feedback to dynamically adjust welding parameters. These parameters include weaving; travel speed, voltage and wire feed speed to volumetrically fill the supported joint designs.

AquaBell Paint Applicator

FANUC Robotics' AquaBell direct charge waterborne paint applicator applies waterborne paint electrostatically and reduces paint waste. The applicator also provides closed loop fluid control. FANUC Robotics and Sames jointly developed the applicator to improve finish quality and process throughput while providing environmental benefits when integrated into a robotic paint system.

Customer Resource Center (cRc)

FANUC Robotics created the cRc Internet Access Solution as a way for customers to have easy access to the Customer Resource Center and its solutions. The cRc Internet Access Solution is a secure subscription-based Internet site allowing customers to be able to directly connect to the functions of FANUC Robotics' Customer Resource Center. Customers can register via www.fanucrobotics.com to gain access.

FANUC Robotics' World-Class Call Center

FANUC Robotics is continuously redefining the performance of a traditional customer support call center. Our objectives are the ease of doing business and improving customer satisfaction. We accomplish this by investing in automation and the industry's best people to create the most responsive and advanced call center.

Integral Pump Control

The FANUC Robotics Integral Pump Control is designed for the application of one or two component paint materials. IPC features metering pumps directly coupled to FANUC servo motors which are operated by the SYSTEM Robot Controller.

Integral Servo Dispenser

FANUC Robotics' Integral Servo Dispenser (ISD) is a precision metering device designed to enhance performance and provide accurate control of material used in FANUC Robotics' sealant automation systems.

Multi-Function Gun Sealer Applicator

This applicator is intended for use with a volumetric controlled metering device like FANUC Integral Servo Dispensing-ISD = +/-1% or FANUC Integral Pneumatic Servo-IPS = +/- 3%.

Multi-Stream Applicator (MSA)

This applicator is intended for use with a volumetric controlled metering device like FANUC Integral Servo Dispensing-ISD = +/-1% or FANUC Integral Pneumatic Servo-IPS = +/- 3%.

Industrial Robot Vision and Controls

Robotic Maintenance Services

FANUC Robotics Customer Resource Center (cRc) offers robot maintenance programs which promote customer productivity by reducing breakdowns, maximizing robot uptime and improving program efficiency. Our mission is to be more proactive in the operation and maintenance of your robot to reduce production downtime and reduce the Mean Time to Repair.

ServoBell Paint Applicator

The ServoBell Paint Applicator is an electrostatic direct charge waterborne rotary bell atomizer developed by FANUC Robotics America, Inc. The ServoBell is designed for high-performance, robot bell spray applications.

ServoTorch

FANUC Robotics ServoTorch is a fully-integrated, servo-controlled, wrist-mounted, four-roll (4) "Pull" wire feeder controlled by the ARC Mate series robots. The design is optimized to feed aluminum and soft wire. The drive motor is a proven FANUC high torque servo motor with a pulling capacity suitable for unassisted wire feeding from conventional spools or pay-off packs.

Spare Parts Start-up Kits

To make it easy for customers and integrators to order spare parts, FANUC Robotics America, Inc. is now offering spare part start-up kits, Controllers RJ3 and RJ3iB, for the following series of robots: LR Mate 100i and 200i, M-6i, M-16i, M-410i, R-2000iA, ARC Mate 100i, ARC Mate 120i and M-710i.

SpeedDock Color Change Station for ServoBell

FANUC Robotics' SpeedDock Color Change Station is a complementary product to the direct charge waterborne ServoBell rotary bell atomizer.

Training Schedule

FANUC Robotics training classes include Programming, Electrical and Mechanical Maintenance courses. Classes are now available for open enrollment. Please see the following schedule for class locations and start dates.

Training Solutions

FANUC Robotics provides formal training solutions to customers on our standard robot product line and systems designed and supported by the company. FANUC Robotics provides training assistance in many formats including instructor support, train-the-trainer programs, customized product training, computer-based training programs and distributor training programs.

VersaBell Paint Applicator

The VersaBell Paint Applicator is an electrostatic rotary atomizer developed by FANUC Robotics America, Inc. The VersaBell is designed for high performance, robotic bell spray applications.

VersaBell Test Stand

The FANUC Robotics' VersaBell test stands are electric-pneumatic devices used to test the FANUC Robotics' VersaBell and VersaBell II applicators.

CONTROLS

Industrial Robot Controls

iPendant

The ergonomically designed iPendant is the next generation in user interface technology from FANUC Robotics America. The Internet-ready iPendant allows users to browse the information available on the Internet/Intranet. Users can also customize robot information displayed on the iPendant.

SYSTEM R-J3 Controller

FANUC Robotics' SYSTEM R-J3 Controller uses advanced technology packaged in a proven, reliable third generation controller design. Process capability and open architecture features improve application and motion performance while simplifying system integration.

SYSTEM R-J3 incorporates FANUC Robotics' unique "plug-in-options" concept which allows the flexibility for applications specific configurations while maintaining a commonality for all users of the system.

SYSTEM R-J3iB Controller

FANUC Robotics' SYSTEM R-J3iB Controller uses advanced technology packaged in a proven, reliable controller design. Process capability and open architecture features provide intelligence to improve application and motion performance while simplifying system integration. SYSTEM R-J3iB Controller incorporates FANUC Robotics' unique "plug-in options" concept, which allows flexibility for application specific configurations while maintaining a commonality for all users of the system.

SYSTEM R-30iA Controller

FANUC Robotics' SYSTEM R-30iA Controller uses advanced technology packaged in a proven, reliable and efficient controller design. Open architecture, integral sensor hardware and built-in process intelligence improve the application and motion performance while simplifying the system integration.

SYSTEM R-30iA Controller incorporates FANUC Robotics' unique "plug-in" design, providing flexibility for application specific configurations and a common look and feel for a wide range of users of the system.

SYSTEM R-J3 I/O Products

FANUC Robotics America, Inc. offers a wide range of Input/ Output (I/O) products for the R-J3 Controller to meet end user application requirements. The FANUC Robotics I/O Options table shown on the last page outlines the various I/O types available for integration of the R-J3 Controller into today's control systems.

SYSTEM R-30iA I/O Products

FANUC Robotics America, Inc. offers a wide range of Input/output (I/O) products for the R-30iA Controller to meet end user application requirements. FANUC Robotics' I/O link devices (Model A, Model B and Process I/O) are limited to a total of 512 inputs and 512 outputs (each analog channel consumes 16 points of digital I/O within this area).