MOTOMAN tracks and gantry solutions are made for extending the robot's working range. All products are fully integrated in the robot's control system NX100.
Two Axes Positioners, 1000-5000 kg, 1-Station
MT1-1500 S2X One Station Positioner
This is a one station positioner for workpieces requiring rotation about two axes. Its high freedom of positioning makes it easy to find the optimum position even in complicated workpieces.
The MT1 positioner is designed to withstand the strain of heavy payloads. When used together with a MOTOMAN Gantry robot it provides the best possible workpiece access.
MT1-5000 S2X One Station Positioner
This is a one station positioner for workpieces requiring rotation about two axes. Its high freedom of positioning makes it easy to find the optimum position even in complicated workpieces.
The MT1 positioner is designed to withstand the strain of heavy payloads. When used together with a MOTOMAN Gantry robot it provides the best possible workpiece access.
Two Axes Positioners, 0-1000 kg, 2-Station
VMF-500 S5XL Two Station Positioner
This is a two station positioner for workpieces requiring rotation about two axes. Possible for the operator to load/unload the fixture during welding. It is delivered complete with an anti-glare shield (not shown in the picture).
VMF-750 S5X Two Station Positioner
This is a two station positioner for workpieces requiring rotation about two axes. Possible for the operator to load/unload the fixture during welding. It is delivered complete with an anti-glare shield.
Rotating Modules, 0-1000 kg
VMS-1000 SX Rotating Module
The VMS rotating module is normally used as a base in more complicated two station positioners or turning tables. Due to its simple design, with few mechanical parts, it provides maintenance free operation even with high payloads. The sleeve bearings makes endless rotation possible.
Cables and hoses are fed into the fixture from a hole in the center of the fixture disc.
Rotating Modules, 1000-5000 kg
VMS-3000 SX Rotating Module
The VMS rotating module is normally used as a base in more complicated two station positioners or turning tables. Due to its simple design, with few mechanical parts, it provides maintenance free operation even with high payloads. The sleeve bearings makes endless rotation possible.
Cables and hoses are fed into the fixture from a hole in the center of the fixture disc.
Rotating Robot Base and Tracks, 0-1000 kg
VST-600 SX Servo Powered Rotating Base
This is a servo powered rotating base for extending the robot’s working radius e.g. when using the robot for machine tending or press brake application.
Rotating Robot Base and Tracks, 1000-5000 kg, Robot Base
VST-1500 SX Servo Powered Rotating Base
This is a servo powered rotating base for extending the robot’s working radius e.g. when using the robot for machine tending or press brake application.
VST-2500 SX Servo Powered Rotating Base
This is a servo powered rotating base for extending the robot’s working radius e.g. when using the robot for machine tending or press brake application.
Rotating Robot Base and Tracks, 0-1000 kg, Floor Mounted Tracks
TRD Pneumatic Floor Mounted Track
This is a pneumatic floor mounted track for a single robot. It can be used to transport a robot from one station to another, or to increase the robot’s working range e.g. when welding large objects.
TSL-600SN Servo Powered Floor Mounted Track
This is a servo powered floor mounted track with one robot carrier. It can be used to increase the robot’s working range e.g. when welding large objects. The TSL track is prepared for zeroing function.
The TSL-600SN track is only available in two, three or four meters total length.
Rotating Robot Base and Tracks 1000-5000 kg, Floor Mounted Tracks
TSL-1000SN Servo Powered Floor Mounted Track
This is a servo powered floor mounted track with one or two robot carriers. It can be used to transport a robot from one station to another, or to increase the robot’s working range e.g. when welding large objects. The TSL track is prepared for zeroing function.
Since the track is built in two- or four meter modules, it is easy to extend to a suitable length.
TSI Servo Controlled Track
This is a servo controlled track. This track is designed for carrying one or two carriages suitable to mount heavy robot types. TSI-track is built up by modules. Each module is 3 meters. The track is used to increase the working area of the robot (e.g. sliding along the positioner) or letting the robot operate two or several workstations. The motions of the track is synchronized with the robot.
Gantry Standard
TSG Gantry
This is a gantry designed for reliable, accurate and economic welding solutions for large components such as excavators, containers and earth moving equipment etc. The TSG-Gantry is servo powered and fully synchronized with the robot controller.
The gantry’s x-beam is built up by 3-meter modules to any desired length with a suitable number of supporting pillars.
In the twin or triple systems, with several robots applied to the x-beam, the robots can work together or independent of each other.
Gantry Heavy Duty
HD Gantry
The HD-Gantry has been designed to provide a reliable, accurate and economic welding solution for production of large components such as excavators, containers and earth moving equipment etc. The HD-Gantry is servo powered and fully synchronized with the robot controller.
The gantry’s x-beam is built up by 3-meter modules to any desired length with a suitable number of supporting pillars.
