Thinking today about your successful products of tomorrow, DELO will support you in the product development process and offer you high-performance adhesives which are specially tailored to your requirements.
We are setting trends for the industry with our wide range of adhesives for extensive areas of application – from bonding glass to high-tech application in the field of RFID. We ensure easy handling of the adhesives by specially developed dispensing and curing systems.
DELO-PHOTOBOND ® Photo-Initiated Curing Acrylates
Properties
- Cured within seconds and allow short cycle times
- High-strength
- Tension-equalizing
- Resistant to moisture
- Crystal-clear
- Especially ageing resistant to e.g. sun-light
- Index of refraction similar to glass.
Applications
- Bonding of glass, glass/metal e.g. for high-quality cosmetics packaging, finishing of glass bottles
- Plastic bonding
- Electronics
DELO-KATIOBOND® Photo-Initiated Curing Epoxy Resins
Characteristics
- One-part epoxy resins
- Curing is triggered by UV or visible light
Properties
- Dry surface
- Outstanding adhesion on different materials
- Good tension-equalizing behaviour
- Low-viscous to pasty
Application
- Micro-electronics
- Electronics / electrical engineering
- Automotive supplier industry
- Smart card industry e.g. the worldwide leading products for chip packaging (Dam&Fill-Adhesives)
- Plastic processing
DELO-MONOPOX® One-Part, Heat-Cured Epoxy Resins
Delo-Monopox AC
Characteristics
- One-part, heat-curing, anisotropic electrically conductive adhesives,
Properties
Delo-Monopox NU
Characteristics
- One-part, non-conductive, heat-curing, reactive resins
Properties
- Extremely rapid curing
- For flip-chip contacting and as die attach
- Fixing of SMD components
Application
- Smart card and smart label technology; e.g. for RFID
- Micro-electronics
- Automotive electronics
DELO-DUOPOX® Two-Part Epoxy Resins
Characteristics
- Two-part epoxies
- Cold curing
DELO-DUOPOX adhesives, casting resins and fillers excel by their extremely high reliability, especially with very large components those which are sensitive to temperature.
Properties
- Good resistance to chemicals and heat
- Specific products with outstanding thermal conductivity
Application
- Mechanical engineering and construction
- Electronics
- Metal processing
- Automotive engineering industry
DELO-CA
Cyanoacrylates
High-strength bonding and fixing within seconds – these are indispensable for production processes which are becoming quicker all the time.
Characteristics
- One-part cyanoacrylates
- Cold curing
Properties
-
Rapid and high-strength bonding of virtually every material like metals, plastics, elastomers, foam rubber, ceramics, textiles etc
Application
- Plastic processing
- Electronics and electrical engineering
DELOMAT Dispensing Systems
Dispensing units DELOMAT are exactly adapted to the high-tech adhesives – enable the optimum production process.
The user profits from an economical processing of adhesives which can be flexibly integrated into the process.
DELOMAT 100
DELOMAT 400
With all the advantages of DELOMAT 100 and extra flexibility
- Variable media supply of up to four independent work stations, either fully or semi-automatic
- Free programming of dispensing-, cycle-and delay times of four channels
- Separate control air outputs for additional units, e.g. slewing mechanism, pneumatic jack, light-guide lamps
Light Systems- DELOLUX
Light-curing adhesives are cured with lamps which generate between 100 and 1,000 times the intensity of normal daylight. We offer you the lamp series DELOLUX adjusted to the adhesives. The area and point lamps can be integrated in the production process in various ways and they enable optimum processing of qualitatively high-grade adhesive.
DELO CURING LAMPS FOR CURING PHOTO-INITIATED CURING ADHESIVES:
DELOLUX 80
- High-intensity LED spot light source
- High degree of process reliability due to monitored functions
- Service life of the light source: > 10,000 h
DELOLUX 04
- Point lamp with light
- Conductor
- High process reliability
- Programmable times of open screen enable constant exposure times
DELOLUX 03 S
- Built-incapable area lamp with external series device designed for stationary use
|
|
