Pneumatic Crimping Machines - TPM1
Pneumatic crimping head TPM1 is a simple pneumatic crimping head. To crimp with this tool you just need to plug it to your air compressor supply tube. Once done you’ll be free to place manually the head on every different height bottle (same neck diameter) and crimp in sequence without removing bottles from original carton packaging.
Advantages
- Immediate use
- Cost efficiency
- Limited air consumption
- Simple use
- No maintenance required
Pneumatic Crimping Machines - AP01 (Perfume Crimping Version)
Pneumatically assisted - manual crimping machine. AP01 is a simple crimping machine suitable for glass bottle and aluminium 1” can crimping. This is the only pneumatic operated machine, in our range, that will allow you to crimp aluminium cans. By a simple lever movement, the unit will place the bottle neck into crimping head (jaw) and start pneumatic ram cycle. This machine is recommended for small-medium scale production.
Note
This machine is available in two different set-ups:
- Perfume crimping version
- Aerosol valves (cans) version
Pneumatic Crimping Machines - AP93/P
Pneumatic crimping machine (semiautomatic action). This machine is recommended for small and medium production. Machine cycle start is caused by simple pressing of two “start” buttons (to be pressed at same time) placed on machine base. Excluding 1 inch size, all crimping heads can be mounted in order to crimp all pump sizes
Pneumatic Crimping Machines - AP02
The semi automatic, pneumatic crimping machine AP02 is the right compromise quality-price for a continuous middle-high production. Versatility and simple use are main characteristics. Remarkable is the possibility to move incrementally (get near the bottle, for the first crimping adjustments with little shifts) and with low speed. With AP02 you can set up each crimping head to close every pump size in the market (1” valve crimping excluded).
